Quick Answer: What is a whisker pole for in sailing?

Whisker poles are used to “wing out” the jib when sailing downwind. Sailors who have experienced downwind sailing without one can appreciate the value of being able to stabilize the jib, enabling the sail to work more efficiently.

What is the difference between a whisker pole and a spinnaker pole?

Whisker poles are sized to match the size of the foot of the sail that they are working, while spinnaker poles are sized to match the distance from the mast to the bow, also known as the boats “J” dimension. Because of this, Whisker Poles tend to be signifficantly longer than spinnaker poles for the same boat.

How long should a whisker pole be?

Whisker poles should be 100% of the foot of whichever headsail is being flown. Measure from the tack to the clew and the whisker pole should be this length. You need to have some overlap in the pole. Poles telescoped to their maximum length are at their weakest, strength-wise.

Can you use a spinnaker pole as a whisker pole?

A spinnaker pole with a declared length not longer than 1.1 * ‘J’ can be used as a whisker pole to trim headsails.

How do you use a spinnaker pole?

How to Set a Spinnaker

  1. Always put the spinnaker pole up on the windward side and hoist the spinnaker from the leeward side.
  2. Make sure the pole is all the way forward as the spinnaker is hoisted.
  3. Make sure the spinnaker sail bag is attached to the boat, connect the halyard to the head of the spinnaker.
IT IS INTERESTING:  Quick Answer: What is the best Oneill wetsuit?

What is a pole in the middle of a sailboat called?

Mast: The mast is a large, vertical pole that holds the sails up.

How do you measure a spinnaker pole?

Spinnaker pole length: Rig the pole at a convenient height horizontally on the mast on the centreline of the boat. Ensuring that the pole is pulled forward to its maximum extension on the heel fitting, measure the distance from the front face of the mast to the extremity of the pole.

What is the difference between a genoa and jib?

Colloquially the term is sometimes used interchangeably with jib. A working jib is no larger than the 100% foretriangle. A genoa is larger, with the leech going past the mast and overlapping the mainsail. … Working jibs are also defined by the same measure, typically 100% or less of the foretriangle.

Go Aquatic