What can you do with old scuba gear?

Can you sell old scuba gear?

We Can Buy, Sell or Trade you your old stuff. And if your old gear and the inches of dust represent the years its been since your last dive, bring it in and we’ll give you FREE rental equipment and a FREE SCUBA Tune-Up too. …

Are old scuba tanks good for anything?

Be Certain That the Tank Is Unusable

​Old tanks are not necessarily unusable as scuba equipment. If the tank’s hydrostatic test date is passed, send the tank in for testing. Steel tanks have a very long life and steel tanks from the 1950s can still be found in perfect working condition.

How much are old scuba tanks worth?

Scrap metal value of scuba tanks:

At current rates, scrap aluminum is worth about $0.75 per lb. So the current minimum value of an aluminum scuba tank (without the tank valve) is around $23. A standard steel 80 cu/ft tank weighs about 35 lbs empty. At current rates, scrap steel is worth about $0.17 per lb.

How do you dispose of scuba tanks?

They should be rendered unusable for dive purposes and disposed of as scrap metal. You could drill the tanks, usually a 3/8″ or 1/2″ drill bit applied in a couple of places does the trick. Another method is to destroy the threads where the valve screws in. A simple cold chisel would do that job nicely.

IT IS INTERESTING:  Question: Are wetsuits made of rubber?

Do scuba tanks go bad?

We often take for granted that our cylinders are safe, and that dive staff has tested and properly cared for them. But if a cylinder “goes bad,” it can have life-changing (or even life-ending) consequences for the diver or whomever is filling it. Scuba cylinders leave the factory tested to strict engineering standards.

How much does it cost to recertify a scuba tank?

It’ll cost you around $40-50 to get them re-inspected/certified/filled, but new aluminum tanks w/valves will cost $170-180 these days.

What is better steel or aluminum scuba tanks?

Because steel is stronger and more ductile than aluminum, construction of a tank requires less steel than aluminum. This usually means that for an equal gas capacity, a steel tank will have a total weight less than an aluminum tank yet have better buoyancy characteristics.

How long can a scuba tank be used?

But how long a scuba tank lasts also directly depends on the depth at which it’s used. Based on personal experience, an average open water certified diver using a standard aluminum 80-cubic-foot tank on a 40-foot dive will be able to stay down for about 45 minutes before surfacing with a safe reserve of air.

How do I know if my scuba tank is good?

The permanent markings usually indicate the manufacturer, material used in the construction of the cylinder, the service pressure, cylinder serial number, size and the date of the cylinder’s most recent hydrostatic test. The hydro date determines if the tank is safe to fill and use.

What can you do with old tanks?

Call your local recycling center. Specify whether your tanks are aluminum or stainless steel (both are recyclable). Many local recycling centers will accept tanks. If your local recycling center doesn’t accept your empty O2 tanks, ask them for a recommendation of another recycling center or disposal method.

IT IS INTERESTING:  Where are Dagger kayaks made?
Go Aquatic